10W LED floodlight

10W LED floodlight 1.stable, safe to use and free from glare 1. Apply the high power integrated LED with multiple chips inside as light source, luminous flux typical 100-110lm/W. 2. As the LED is connected to the crust closely, the heat from LED can be dissipated by the aluminum wing of the housing and the air cross-ventilation system to insure the lifespan the light efficiently. 3. High Power 10W LED Flood Lighting is seal with silicone rubber gasket, the surface is anodized and through spraying plastic technics to make sure the waterproof function to IP65. 4. Apply the aluminum reflector to make sure high light reflecting efficiency to insure the luminous flux.5.Scientific design with quality chips and rational quadric optical light distribution make it stable, safe to use and free from glare.6.Circuit design: wide voltage range:85-265v,and wide frequency. High efficiency and power factor. Applications:1. Tunnel, Subway, Underground Lighting; 2. Gymnasium, Sports Stadium Lighting; 3. Building, Billboard Lighting; 4. Gas Station, Garage Lighting; 5. Park, Garden Lighting; 6. Workshop, Factory Lighting; 7. Warehouse, Storage Lighting; 8. Yard, Square Lighting; 9. Road, Highway Lighting; 10. Station, Dock, Deck, Ship, Boat Lighting;

Technique Parameter:

Application:

Floodlighting and wall washing for bars, clubs, hotels, stages, parks, plazas, commercial buildings facade, mosques, museums, and art galleries, historical buildings, etc.

Connect cable: standard cable length is 30 cm .

Dimension drawing:

Mounting instruction:

1. Make sure the setting grounding and power off before use

2. Please make sure the signal cable and power cable of last lamp is waterproof.

3. Please make the controller and power supply is working under Ventilation, dry environment.

4. Please check the main power cable and signal is working normal. If working when short circuit will making controller burned.

Attention :

1. please turn off the power before teardown or mounting the products ;

2. Replace the protect cover if any broken ;

Common fault and elimination method

1. If the light is not working, please check and make sure the power is switch on.

2. If the light keeping working after power off, please check and make sure power cable is no contact undesirable.

Alarm: If the light can not working normal and Ruled out above error, please contact with Professional maintenance personnel and forbid disassembly if unprofessional.